Sections are a vital part of creating drawings. Vectorworks has tools and commands to create, control, and edit section viewports. In this workshop, we looked at what a section is, how to create sections (using a few different methods), and finally how to control the visibility of objects in front of the cut plane.

See the knowledgebase article for sections here…

Continue reading

SST_1710 – What’s New In Vectorworks 2018



It is common at this time of the year to look at the added features and benefits of the new Vectorworks release, so that’s what we’re doing in this manual. Following along from other years, there is a table that shows the new features and benefits of the new Vectorworks. As I have done in previous years, I will not be detailing every improvement, just the ones that are fundamental.

Vectorworks typically introduces a multitude of small updates that will really speed your workflow. These small updates may not be one of these major features listed below, but they can still dramatically improve your workflow.

Continue reading

cadmovie_1607-13 – From 2D To BIM – Part 13

Creating A Section – It is now time to complete the drawings. If you are used to a 2D only workflow, you may not be used to using viewports and sheet layers to create your drawings. We have already set up one sheet layer and created several viewports but these might not be enough to fully describe the project. In this case we may need to create more viewports such as a section or a construction detail. If you are used to working with layers and viewports, then you will already know that we need to annotate these viewports adding notes, labels, and dimensions.


Continue reading

Vectorworks Tip 328 – Section Viewport


Section viewports allow you to cut a section through an object, or several objects. After activating the Create Section Viewport… Command from the view menu, click once to start your section viewport, then click once more for the other end of the section viewport. Click once to define the direction of the section viewport (don’t worry if you get this wrong, you can always change it later) and click once more to finish. Remember to name your viewport and choose the sheet layer for it.

Architect_075 Architect Special Interest Group August 2015 (am)

August_075_amIn the session we looked at Section Viewports. There seems to be some confusion with dealing with Section Viewports so we went through several options and settings dealing with these. To start with, we looked at a standard Section Viewport created from a design layer, (this isn’t the only way to create a Section Viewport, you can also create Section Viewports using sheet layers if you select a viewport first).

Continue reading

Architect_057 Architect Special Interest Group November 2014 (am)

image063In this session we looked at the Select Similar tool, Reshaping Walls, Custom Selection command, adding an object to a window symbol to fill in the walls on some plans, Section Viewports, using the Clip Cube to create a Section Viewport, and creating a Detail Viewport.

Continue reading

BIM_SIG_055 Architect Special Interest Group October 2014 (am)

2014-10-23_11-40-13In the session the users wanted to look at the clip cube, how to use the clip cube to create section viewports, how to create section viewports with a step in the section line, how to control the graphics on a section viewport and how to deal with the gable wall in a split gable roof.

Continue reading

BIM_SIG_048 Architect Special Interest Group June 2014 (pm)

2014-09-23_14-32-46In this session we looked at a complex 3D modelling problem of a skate park, we looked at creating section viewports, we looked at using section viewports to create internal room elevations, how to add annotations to these elevations and how to create symbols that would assist with the room elevations.

Continue reading

BIM_SIG_035 Architect Special Interest Group December 2013

Continuing on from the Special Interest Group 033, were now starting to take our project into the conceptual design drawings for a single unit. You have a choice – you can create your drawings in a separate file (the referenced house file) or you can use the combined site plan model to create your conceptual drawings.

Continue reading