A site model is a 2D and 3D representation of a mathematical model that is based on 3D data. In simple terms, a site model is a 3D digital version of your site. You can use it for visualization, solar studies, cut and fill calculations, and much more. These sessions look at importing information and using that information to create the site models.
Tag Archives: importing
Interactive Workshops July 2017 – Importing
Vectorworks has several options for importing objects and files into your Vectorworks projects. These options allow you to import drawings from other computer systems, 3D models, images, PDFs, and other proprietary file types.
This means that you can use the Internet to locate useful parts or useful models for your projects and import them into Vectorworks. When you import these objects, they become native Vectorworks objects.
SST_1707 – Importing
Introduction
Vectorworks has several options for importing information. these options allow you to import drawings from other computer systems, 3D models, images, PDFs, and other proprietary file types.
This means that you can use the Internet to locate useful parts or useful models for your projects and import them into Vectorworks. When you import these objects they will become native Vectorworks objects.
This manual will be looking at all of the options for importing. For some importing commands we will be looking at all of the options. For some of the importing commands (DXF/DWG) we will only look at these in general terms.
Continue reading
Getting Started Special Interest Group December 2016
In this session we looked at quick and simple ways to create 3D objects, how you can use these to create more complex objects, how to find more complex 3D objects online, how to import them, and how to use the imported models.
cadmovie_1609-02 – Quick Concept – Part 2
Importing the Site Plan – It is important for you to get a site plan. You can get a site plan from a consultant if they are working on the project, or a survey, if you have one employed. If this is a quick concept project, you may not have access to a consultant or a surveyor, so you will have to find the information from another source.
Vectorworks Tip 404 – DXF/DWG – Drag And Drop Importing.
If you can locate your imported DXF/DWG file in a Finder window (file explorer) and you can see your Vectorworks drawing window, then you can drag your DXF/DWG file from your finder window onto your Vectorworks drawing window, and Vectorworks will then import that DXF file. This is known as drag and drop importing and it works not just with DXF/DWD files but it works with all file importing formats.
Vectorworks Tip 400 – DXF/DWG – What Is It?
When you’re dealing with Vectorworks there really is very little difference between DXF and DWG, so I will treat these as the same type of file. DXF stands for Digital eXchange Format, while DWG is the native file format for AutoCAD. In simple terms, DXF/DWG is a simple way of interchanging information between different CAD programs. This information tends to be plans and sections, and it can be either two-dimensional or three-dimensional. DXF/DWG does not carry information attached to the objects, so you might think of this information is being “dumb”. There are several options for importing and exporting DXF/DWG, so look out for further posts about this.
Vectorworks Tip 297- Importing an Image File
Beginner – An easy way to import an image file is drag it and drop it onto Vectorworks from a Finder Window (or File Explorer window). Choose the required compression and click on the OK button.
Vectorworks Tip 286 Importing a PDF
Landmark_SIG_015 Special Interest Group November 2012
In this session we looked at getting started with the project, based on information that had been measured on-site. In the situation the information was not imported from a survey, it was actually measured by the people in the office when they visited the site. The methods of measuring were a theodolite and a tape measure. This is enough information to give the heights in the setting out from known points on the site.
Landmark_SIG_014 Special Interest Group November 2012
In this meeting we continued our series on getting started with Vectorworks Landmark. An important part of creating a landscape plan is creating plants. In Vectorworks 2013, the plant preferences have been changed. There are now two dialogue boxes that control plant settings. The new settings with the two dialogue boxes allows for more flexible plant placement.
Landmark_SIG_012 Special Interest Group October 2012
This is the movie from the morning session of the landmark special interest group. We looked at starting a project from the beginning by importing a DXF/DWG file. We looked at the options for importing this type of file and then we created the other layers that we needed, and then we created plants.
Importing and Exporting Files – Part 6
Importing Sketchup Files – There web sites where you can find 1000’s of Sketchup files for furniture, cars, people and so on. You can import these into Vectorworks.
Importing and Exporting Files – Part 5
Importing Shape Files – Shape files are geo-referenced (referenced to the earth) so they know where they are in the world. You can import these into Vectorworks.
Importing and Exporting Files – Part 3
Exporting DXF File From a Design Layer – There are often times when you need to export your work to a consultant so they can work on it. You will have to decide what you want to export, as there are several options.
Importing and Exporting Files – Part 2
Importing DXF Files – There are often times when you need to import a file from a consultant. Your consultants may be using a program other than VectorWorks, so you may have to share information in a form that both your CAD program and your consultant’s program understands.
Importing and Exporting Files – Part 1
Importing PDF Files – Vectorworks can import single or multi-page PDF files. Depending how the PDF files are made, you can span to them and extrude directly from the PDF.
Landmark_SIG_008 Special Interest Group August 2012
This is the movie from the first session Landmark Special Interest Group, August 2012. We are looking at starting a project from the beginning, looking at how to get started.
beginnercast041 – Drag and Drop Importing
Recent versions of Vectorworks allow you to drag and drop images, PDF’s, and DXF/DWG files. This can speed up the importing process.
cadmovie823 – Referencing Image Files Part 1
Introduction. Referencing is where you link one file to your current Vectorworks file. There are several options with referencing. You can reference an image file, a PDF, or another Vectorworks drawing.