Escalators – If you need an escalator, this is the tool for you.
Category Archives: Vertical Transport
Vertical Transport – Part 11
Unusual Stair – Sometimes you get stairs that don’t fall in to the configurations that VectorWorks has set up. You have the following choices, you can make the stairs out of Floors or you can draw the stair as 2D objects only.
Vertical Transport – Part 12
Ramps – The Ramp tool has some limitations, but if you need a ramp this tool might do what you want.
Vertical Transport – Part 10
Custom Stair Library – The cool part about this is that is you store this file in a special folder. If you save your file to the correct folder in the VectorWorks folder, these stairs become available for use on any project. When you install Vectorworks, you get a library file with standard stairs. If the stairs do not suit your construction method, you should remove them.
Vertical Transport – Part 9
Custom Stair – Stair with Winders – This is how to make a stair with winders with the Custom Stair tool.
Vertical Transport – Part 8
Custom Stair – Stair with Landing – L Stair – This is how to make a stair with a landing a flight to the left.
Vertical Transport – Part 7
Custom Stair – Straight Stair with Landing – This is how to make a straight stair with a landing (platform).
Vertical Transport – Part 6
Custom Stair – Straight Stair – This is how to make a straight stair.
Vertical Transport – Part 5
Stair Tool Library – The cool part about this is that is you store this file in a special folder. If you save your file to the correct folder in the VectorWorks folder, these stairs become available for use on any project.
Vertical Transport – Part 4
Stair Tool – Stair with Winders – This is how to make a stair with a winders.
Vertical Transport – Part 3
Stair Tool – Stair with Landing – L Stair – This is how to make a stair with a landing at a angle, an L stair.
Vertical Transport – Part 2
Stair Tool – Straight Stair with Landing – This is how to make a straight stair with a landing (platform).
Vertical Transport – Part 1
Stair Tool – Straight Stair – This is how to make a straight stair.