When you create objects in Vectorworks they can be 2D, 3D or a combination of both. Many objects also have information attached to them. If you think of a door for example, the door has a plan view, you can view it in 3D, and you can report the information from the door. If you think about the information attached to the door, that’s like the record format we are talking about. The idea of a record format is that it is a way to store information.
When you create drawings, you need to use the concepts that are built into Vectorworks in order to make your drawings efficient. In this manual we will be looking at several concepts that we can use to speed up the creation of drawings, concepts such as Design Layers, Classes, Sheet Layers, Viewports Site modeling, and BIM.
It is important to use these concepts because it allows you to create information and use it on several drawings. For example, if you are creating paving (using a hardscape object) you could use the same hardscape on the location plan, the site plan, a detailed hardscape in plan, and sections. If you needed to make a change to the paving, when you updated it on the design layer, it would update in all viewports. This makes it really efficient to create your drawings, but more importantly, it removes the ability to make mistakes.
The Resource Manager is an extremely important part of your Vectorworks interface. It allows you to look for resources (hatches, line styles, wall styles, plants, et cetera). So it’s important that we understand how to use it because it is will make you more efficient and improve your productivity.
The Resource Manager that you see on your screen is just one part of the total concept. Vectorworks uses the Resource Manager for many objects and tools to allow you to find the resources that you need when you use that tool.
As we have done for most of the other years, we will be reviewing all the manuals for 2016. We have covered a lot of ground and the manuals seems to be covering workflows now, rather than just covering tips or techniques. I’m really happy with this change because it takes you from a start to a finish point, teaching you the steps along the way.
In this manual we looked at interior design, and while we are the kitchen as the basis of our design, this manual is about more than just kitchen design.
It is tempting to think that if we covered the design of the kitchen, that would be enough. But also like to show you how you can use Vectorworks for creating more of an interior design that showed details of the kitchen, how the kitchen connects to other rooms, demolition, and furniture. We would also like to use the three-dimensional models of our furniture to create the drawings.
- Resource Manager
- Camera Match
- Structural Member Objects
- Irrigation Tools
- Virtual Reality
We will be covering these technologies in detail, probably later in the year or early next year, but in this manual there will be a brief overview of them.
Last year there were several new technologies introduced and these have had a major upgrade this year:
- Subdivision Modeling
- Project Sharing
- Vectorworks Graphics Module
As well as these major changes to Vectorworks there are also some changes to the interface. Often, these changes do not seem very dramatic, but history shows us that these changes tend to make it easier to use Vectorworks, making us more productive.
Vectorworks has the tools and commands to quickly create a concept model. But we want mode than just a few elevations, we need to know if the main site can be subdivided, how large the project can be, and how much it might cost to construct.
In this manual we will be looking at ways to create and visualise the concept. We will start by creating the site, then the site model, create the adjoining buildings, create the design, and set up solar studies.
Vectorworks has the ability to create roofs from polygons and walls, and it has the ability to automatically generate some roofs accessories, but not all the accessories that you might require. For example, Vectorworks will create roofs, facias, and soffits, but it will not create ridge flashings, barge flashings, barge boards, gutters, and downspouts (downpipes). As we have seen from other manuals, it’s important to model as much as necessary to complete the elevations. So if Vectorworks does not create these parts that you need, how are we going to create them?
That’s what this manual is all about. First will look at creating a standard roof and the standard accessories that Vectorworks will create, because some of them can be very useful. Then we will look at how to create the other accessories that we require, but Vectorworks won’t create automatically.
Just lately, I have been teaching several users who want to move from using a workflow to using Building Information Modelling (3D workflow). In the past, I had several users who would say “I want to get to the under my belt first then look at 3D.” This suggests that 2D is a productive method and that 3D is a luxury. This completely misunderstands the way Vectorworks creates drawings. 3D is not a luxury, it is an intrinsic part of the modelling/drawing process.
When you use Vectorworks effectively the 3D components are easy to create, they will create your drawings, and when you update the model it will update your plans, sections, and elevations. Not only is this fast and easy, it also saves lots of errors.
Energos is a system in Vectorworks that allows you to look at the overall energy consumption of your project. It includes the summer and winter climate and it uses the building elements in the file to do the calculations.
This means that you have to use a full BIM model to create your project you have to have a Heliodon for the climate data, spaces for the volume, heating systems, cooling systems, and shading on the windows.
When you have all the data, its is quick to create the Energos report. This manual will be looking at how to create the building elements, how to add the energos data to these, how to choose which building elements should be included in the energos calculations, how to add the heliodon, and how to control the Energos Project Data.
Some projects need more than one person to work on them. Maybe the project is large, maybe the deadline is short, but either way, you need more than one person on the project. Normally, you can only have one person working on the file at a time. So, you could divide the file into parts, you could divide the file into parts that you can reference, or you could set up a system that shared all of the information. Either way, it is all about sharing information on the project – Project Sharing.
Subdivision services have been around for some time as a computer technology, but not implemented in computer programs very often. The subdivision surfacing techniques employed by Vectorworks have been developed by Pixar Inc. and Vectorworks are using their system.
DRAFT- In this manual are going to cover setting up an Alteration and Addition project. I sometimes call these renovation projects, but as someone recently pointed out, renovation suggests repairing. This manual is really about setting up an existing building which we can then amend to suit.
We will start with a discussion about measuring an existing building. There are several ways to deal with this:
- manually measure the project
- laser measure and manually record
- laser measure connected to tablet
- measured electronically with iphone
- subcontract to surveyor
In this manual are going to cover the concept of creating a building takeoff report. In order to do that we are going to cover the basics of creating worksheets (which is the technique we need to use to create a report). We will also look at designing a building takeoff, because while Vectorworks has the ability to report all the information you require, it doesn’t know yet what information that might be.
It is most important that you understand the concept of using worksheets. We have covered worksheets and other manuals, and I will not be repeating some of that information, but I will be covering enough for you to understand how a worksheet is designed to be used.
Rendering is a fun art of using Vectorworks and in the past we have covered lighting (1502), but we covered it from the point of view of interior and architectural lighting. This manual is about exterior lighting, which suggests that we should be looking at nighttime lighting for architectural and landscape projects.
This means that we have to think about our rendering from a completely different point of view. Instead of trying to make sure that everything is visible, we’re trying to create a mood. We have to consider things like the moon, the night sky, the lights on the building, the lights inside the building, street lights, garden lights, et cetera.
At the Vectorworks Design Summit (April 2015), they announced that Vectorworks 2016 would include a new visual scripting language. This new scripting language is called Marionette. This is what Wikipedia says about visual scripting languages in general:
In computing, a visual programming language (VPL) is any programming language that lets users create programs by manipulating program elements graphically rather than by specifying them textually. A VPL allows programming with visual expressions, spatial arrangements of text and graphic symbols, used either as elements of syntax or secondary notation. For example, many VPLs (known as dataflow or diagrammatic programming) are based on the idea of “boxes and arrows”, where boxes or other screen objects are treated as entities, connected by arrows, lines or arcs which represent relations.
Every year we get an upgrade to Vectorworks. Usually we get a few exciting features, some features that don’t look very exciting but a very beneficial, and many small corrections to existing tools. This year is no different.
For Vectorworks 2016 we have five major new technologies:
- Project sharing
- Point clouds
- Subdivision Modelling
We will be covering these technologies in detail, probably later in the year or early next year, but in this manual there will be a brief overview of these technologies.
As well as these major changes to Vectorworks there are also some subtle changes to the interface. Often, these changes do not seem very dramatic, but history shows us that these changes tend to make it easier to use Vectorworks, making us more productive.
Vectorworks has annual upgrade cycle. This means that every year you’ll have to get used to Vectorworks being updated. But what does this mean? In simple terms, You will be working on an older version of Vectorworks and then you will have to update your project and start working in a new version of Vectorworks. Vectorworks 2016 includes a new Migration Manager that will help you to migrate your default content, workspaces, and libraries from your old versions of Vectorworks to the new version. However, if you have not arranged your libraries, workspaces, and default content correctly, the migration manager will be of little use to you. Continue reading
This manual is the last manual on the series on site modelling on site modifying because the roading tools quite often used as site modifiers. Don’t forget to refer to the previous two month’s manuals (1506 and 1507) for more information on site modelling. This manual looks specifically at the six different roadway tools:
The Roadway (NURBS)
Roadway (Custom Kerb)
Thelast two tools are very powerful and most of the manual will focus on those.