Vectorworks Tip #232 – Site Modelling – Site Modifiers – Pads Posted on March 14, 2015 by jonathan These are your first type of site modifier. They are usually flat, but you can add a slope to the pad if you want. Use pads to create flat or sloping areas on a site model. Pads can be square, rectangular, round, polygonal, any shape you want… Other Posts that Might be Of Interest Vectorworks Tip #190 - Site ModellingTo create a Site Model you require 3D data for the spot levels of the… Vectorworks Tip #228 - Site Modelling - Site Modifiers Concept Site Modifiers are used to modify the site model. There are a few tools that… Vectorworks Tip #216 - Site Modelling - Grid Entry MethodFor some users, this is the default way of recording information on site. If you…