Using the Align/Distribute command to line up the reinforcing. [ms-protect-content id="34491,34492,34493, 34494, 34495, 34496, 344927"]…
cadmovie959 – Back to Basics (Creating) – Part 18
Circle – This exercise is designed to show you the various modes for creating circles. You cannot always use the same mode for every situation, so you need to know what the different modes are.
[ms-protect-content id=”34491,34492,34493, 34494, 34495, 34496, 344927″]
[/ms-protect-content]