If you are using Vectorworks 2011 or better, you can use the Push/Pull tool to create the central divider. If you are using earlier versions of it works you need to change your view first.
cadmovie580
I have created some extremely effective content, but you have to be a member to see it, sorry.
Please become a member so that you can access this content.
Other Posts that Might be Of Interest
3D Modeling - Part 4Split Tool -This is not just a 2D tool, you can use it for 3D modeling. [ms-protect-content id="34491,34492,34493, 34494, 34495, 34496, 344927"][FMP]https://s3.amazonaws.com/vectorworkout/Concept+Modeling/concept04_04.mov[/FMP] [/ms-protect-content]
3D Modeling - Part 3Push/Pull Tool - This tool allows you to push and pull your shapes around. [ms-protect-content id="34491,34492,34493, 34494, 34495, 34496, 344927"] [FMP]https://s3.amazonaws.com/vectorworkout/Concept+Modeling/concept04_03.mov[/FMP] [/ms-protect-content]
3D Modeling - Part 1Creating an Extrusion - You can create simple shapes with this technique. [ms-protect-content id="34491,34492,34493, 34494, 34495, 34496, 344927"] [FMP]https://s3.amazonaws.com/vectorworkout/Concept+Modeling/concept04_01.mov[/FMP] [/ms-protect-content]