cadmovie491 – Plumbing Schematic Part 1

Posted on by

Layers. You should set up the building so that is has layers for each story of the building and maybe for each slab as well.

This is the easy way to make the model of your project. If you set up the layers correctly, the model will almost build itself.

  I have created some extremely effective content, but you have to be a member to see it, sorry. Please become a member so that you can access this content.

Other Posts that Might be Of Interest

  • cadmovie500 - Plumbing Schematic Part 10

    Creating the Viewport for the Plumbing Schematic. [ms-protect-content id="34491,34492,34493, 34494, 34495, 34496, 344927"] [FMP]https://s3.amazonaws.com/vectorworkout/cadmovies/cadmovie500.mov[/FMP] [ms-protect-content…

  • cadmovie501 - Plumbing Schematic Part 11

    Creating the plumbing pipework in 2D. [ms-protect-content id="34491,34492,34493, 34494, 34495, 34496, 344927"] [FMP]https://s3.amazonaws.com/vectorworkout/cadmovies/cadmovie501.mov[/FMP] [/ms-protect-content]

  • cadmovie494 - Plumbing Schematic Part 4

    Walls and Wall Styles. You should set up your wall styles correctly, using wall styles and…

Leave a Reply