Landscape Special Interest Group June (am) 2016

Landscape_095_Jun_16

Topics Covered:
  • 00:22   Import DXF/DWG files using Import Single DXF/DWG, looking at the Import Location options to centre the file on the drawing area
  • 07:58   Referencing the DXF/DWG file rather than importing directly – what the advantages and disadvantages are
  • 15:22   Moving the page area to line up with the imported file.
  • 16:25   Rather than moving the page – move the referenced DXF/DWG file, so when you update the reference, it will stay in the same location, and you can crop the reference file to suit
  • 22:00   How to convert to the next reference DXF/DWG when it has a different name
  • 23:49   Importing the planting layer from another file and moving out to line up with the reference file
  • 29:00   The manual on Project Sharing covers (SST_1605) covers referencing.
  • 29:33   Sending your file to a consultant using DXF/DWG
  • 34:40   Sending your file to another Vectorworks user and binding in the reference files
  • 38:22   Locating the Project Sharing manual on the archoncad website
  • 40:25   Creating a fence symbol to place along a boundary and how to make this follow the site model using Send to Surface
  • 51:45   In NZ and Australia you can use the Draw Handrail tool to create a fence that follows the site model.

Landscape June 2016 am
There is some great protected information here that is only available to paying subscribers. You must be an active paying subscriber to see it, but you can  Subscribe here.

Leave a Reply