Architect_071 Architect Special Interest Group June 2015 (am)

Architect_071
In this session we look to creating a complex roof that had the ridge at 45° to the walls. The solution to this is similar to the roof editing we looked at in the May 2015 roofing manual. Next we looked at ensuring that windows and doors are correctly inserted in walls. This can be controlled by the Wall Insertion mode on the Tool bar. We looked at using classes to control the glass texture on Windows. After that we looked at using the base cabinet, a wall cabinet, and the bookcase objects to create a simple kitchen layout. These base cabinet object can be used to create simple units, a corner unit, Peninsula unit, and so on. It is important to edit the preferences of these objects to get the style of the cabinet that you require. We also looked at using these objects with the split tool and the mirror tool to create the object that we wanted. We did notice a problem with Windoor objects in walls. They did not appear to be creating a hole in the wall. Updating Vectorworks to SP3 has fixed this issue.

There is some great protected information here that is only available to paying subscribers. You must be an active paying subscriber to see it, but you can  Subscribe here.

2 thoughts on “Architect_071 Architect Special Interest Group June 2015 (am)

  1. Hi,
    In this session you had a problem with the window not showing the opening in the wall correctly.
    I suspect you have 2 walls in the same location.

    Regards

    • Great suggestion. That can happen, and it is one option we didn’t check for. Having just drawn the walls I was convinced that I only had one wall in that location but it should have been something I checked for. Thanks for that reminder.

Leave a Reply